kbfr08
May 5, 03:42 PM
??
Did you get it?
Pictures?
I posted the link in the original post, but here it is again http://forums.macrumors.com/showthread.php?p=9835935#post9835935
Did you get it?
Pictures?
I posted the link in the original post, but here it is again http://forums.macrumors.com/showthread.php?p=9835935#post9835935
Crystal-RX
May 1, 01:44 AM
what if i go on a subway and lose service? would i have to unlock it again??
Yes, you have to go through the process to unlock it again!
Yes, you have to go through the process to unlock it again!
mac88
Feb 15, 08:43 PM
Pearl Jam - Live at the Garden.
Zazaban
Jan 9, 09:37 AM
I too, hope iLife is out today. iWork would be good too.
more...
soundman2385
Oct 27, 01:06 AM
don't be too worried my computer came out just fine during the upgrade. everything was left just the way it was. It was a very painless upgrade but that's a good thing :). Everyone have fun with the your new toy. :apple:
Artful Dodger
Mar 1, 10:22 AM
Hello, if you look at my other post on the LaCie there is some info that I got from LaCie and some cd/dvd manfs. about the type of disc you need.
The burner won't be out untill mid March and as LaCie's web page says they are taking pre-orders.
Quote:
kwajaln
Artful Dodger, I had planned on buying one of the LaCie lightscribe external burners in the near future, but you mentioned something that caught my attention. Are there only certain blanks that are compatible with the lightscribe capability? I *assumed* any blank without a surfce design would have done the trick, but I guess not. Thanks!
Yes only certain media will work, TDK, HP (it's their drive in it), Verbatim and only the "+" R media since none of the companies are making any other media as of yet. This was from about 3 or 4 e-mails to different companies that were given to me by LaCie. Also the discs are of a gray scale "etched" quality when burned.
You will have to look for the Lightscribe logo on the side of the dvd/cd cake packs or what ever they pack them in.
Hope this helps.
The burner won't be out untill mid March and as LaCie's web page says they are taking pre-orders.
Quote:
kwajaln
Artful Dodger, I had planned on buying one of the LaCie lightscribe external burners in the near future, but you mentioned something that caught my attention. Are there only certain blanks that are compatible with the lightscribe capability? I *assumed* any blank without a surfce design would have done the trick, but I guess not. Thanks!
Yes only certain media will work, TDK, HP (it's their drive in it), Verbatim and only the "+" R media since none of the companies are making any other media as of yet. This was from about 3 or 4 e-mails to different companies that were given to me by LaCie. Also the discs are of a gray scale "etched" quality when burned.
You will have to look for the Lightscribe logo on the side of the dvd/cd cake packs or what ever they pack them in.
Hope this helps.
more...
elvisizer
Apr 25, 08:55 PM
that won't work in a mac pro unless you replace the heat spreaders, anyway. they have the standard jedec spreaders on them.
wesk702
Oct 29, 10:01 AM
That was fast. Now I can update :D
more...
john_satc
Mar 7, 11:59 AM
Specific instructions for created an encrypted, password-protected folder:
Leslie Bibb
more...
Leslie Bibb
Vinnie Jones and Leslie Bibb
more...
Leslie Bibb|CONFESSIONS OF A SHOPAHOLIC CONFESSIONS OF A SHOPAHOLIC
Leslie Bibb|CONFESSIONS OF A SHOPAHOLIC CONFESSIONS OF A SHOPAHOLIC
more...
Leslie Bibb|Law Abiding Citizen (laughs) Law Abiding Citizen (laughs)
Leslie Bibb|Midnight Meat Train Panel Midnight Meat Train Panel
more...
Almay Beauty World Outtakes
almay face makeup: compare
almay makeup remover
brosenz
Apr 26, 08:37 PM
After some research my top 3 sorted options are:
1.- OCZ Vertex 2 120GB
2.- Intel X25-M 120GB
3.- Samsung 470 Series 128GB
I will be using it as my boot drive for Mac OS X 10.6.7, any suggestion which one would be the best option for speed ?, thanks
1.- OCZ Vertex 2 120GB
2.- Intel X25-M 120GB
3.- Samsung 470 Series 128GB
I will be using it as my boot drive for Mac OS X 10.6.7, any suggestion which one would be the best option for speed ?, thanks
more...
arn
Nov 16, 03:01 PM
ya, it's not the ad. looks like a formatting/html issue in certain browsers. we'll take a look
arn
arn
ECUpirate44
Apr 14, 08:34 PM
Agreed. It looks very Jersey Shore-ish IMO.
Lol Snookies iPhone.
Lol Snookies iPhone.
more...
Tallest Skil
Jun 10, 09:28 AM
i would've thought the iphone + the sdk would be on the same bridge.
I would have thought that Apple still cared about making computers.
Guess we were both wrong.
I would have thought that Apple still cared about making computers.
Guess we were both wrong.
joecool85
Jul 31, 05:43 PM
It takes 578mhz to do one w/u a day. Therefore that would mean an 867mhz would do 1.5 a day (accurate, thats what my PB does) and a 266mhz would do one every 2.1 days, also accurate. Someone compare my equation to their computer. All you do is take your CPU speed and divide it by 578. It *should* give you roughly the w/u you complete in one day.
more...
Jemi9OD
May 5, 07:17 AM
need it to go with you...air
will use just at home...imac
that was easy!
I think this is about the simplest answer, but very very true.
will use just at home...imac
that was easy!
I think this is about the simplest answer, but very very true.
hasek3139
Jun 28, 10:14 AM
yeah im probably camping at my att store, gonna get there at midnight for 7 am opening....... i dont want to take any chances!
more...
wolrabn
May 1, 02:21 AM
Hi guys,
wondered if someone can help at all. Have searched the net quite extensively with this one - I'm now under the assumption the logic board will need replacing unless anyone can tell me otherwise?
I'll list as much info as I can if you need anything else let me know.
Got an iPhone 3g from a friend that only powers in DFU mode when connected to the mac/pc.
Blank screen permanently on.
All restores return error code 6.
2 different usb cables tried, tested on OSX 10.6.7, windows 7 + sp1 and xp sp3 (xp is virtual).
I do not know what version firmware was previously on it.
I have tried to restore official 2.0.1, 2.1, 3.1.2, 3.1.3, 4.1, 4.2
I have tried custom firmware on 3.1.3, 2.1, 4.1
I have attempted jailbreak with redsn0w, pwnagetool, ziphone
redsn0w seems to work then instead of booting to springboard the iphone just reverts back into dfu.
I have checked the logs of these restores and noticed this:
Error setting variable - 'boot-args': (iokit/common) general error
error setting 'boot-args' to '': 1
to which a little googling led me to a possibility with logic board.
I have tried using iRecovery but to be honest unsure where to go with it i also tried TinyUmberella which attempted to fix recovery and the phone didnt reboot. just stayed in dfu.
Although this is in DFU i have kept making a point of making sure i manually place it into DFU when attempting restores just to make sure its not in recovery mode (though i doubt it ever has been as it has never shown the 'connect to itunes' message- just always a blank screen unless recovering.
Recovery for all firmware seems to get 99% of the way before showing error 6.
Does anyone know a way of fixing this issue or do I give up and sell for spares/repair?
Thanks
wondered if someone can help at all. Have searched the net quite extensively with this one - I'm now under the assumption the logic board will need replacing unless anyone can tell me otherwise?
I'll list as much info as I can if you need anything else let me know.
Got an iPhone 3g from a friend that only powers in DFU mode when connected to the mac/pc.
Blank screen permanently on.
All restores return error code 6.
2 different usb cables tried, tested on OSX 10.6.7, windows 7 + sp1 and xp sp3 (xp is virtual).
I do not know what version firmware was previously on it.
I have tried to restore official 2.0.1, 2.1, 3.1.2, 3.1.3, 4.1, 4.2
I have tried custom firmware on 3.1.3, 2.1, 4.1
I have attempted jailbreak with redsn0w, pwnagetool, ziphone
redsn0w seems to work then instead of booting to springboard the iphone just reverts back into dfu.
I have checked the logs of these restores and noticed this:
Error setting variable - 'boot-args': (iokit/common) general error
error setting 'boot-args' to '': 1
to which a little googling led me to a possibility with logic board.
I have tried using iRecovery but to be honest unsure where to go with it i also tried TinyUmberella which attempted to fix recovery and the phone didnt reboot. just stayed in dfu.
Although this is in DFU i have kept making a point of making sure i manually place it into DFU when attempting restores just to make sure its not in recovery mode (though i doubt it ever has been as it has never shown the 'connect to itunes' message- just always a blank screen unless recovering.
Recovery for all firmware seems to get 99% of the way before showing error 6.
Does anyone know a way of fixing this issue or do I give up and sell for spares/repair?
Thanks
LightSpeed1
Apr 8, 01:11 PM
Now THIS is what I'm talking about.
:D
http://scoopertino.com/wp-content/uploads/2011/03/ibox_page_2.jpg Hilarious.
:D
http://scoopertino.com/wp-content/uploads/2011/03/ibox_page_2.jpg Hilarious.
Doctor Q
Jul 9, 02:59 PM
Have fun, Warhay. Among Apple stores in Southern California, it's one of the best places to hang out or wait in line, at least in daytime or evening hours. I've been to a few Apple events there and it was always lively. Probably not as lively at 4am. If you'll be online, let us know what the line is like when you get there.
designboy
Oct 26, 08:20 AM
Wonder if they'll have a line for preordered and a line for new buyers. But I guess the preordered are getting mailed? Anyone bringing a camera or video camera? You could post them on Flickr or YouTube. I thought about that but some people are weird about strangers taking their picture.
MBP13
May 4, 12:16 AM
Hi.
I'm a new Mac user after having dealt with PC's for way too long, and I'm certain that I'll never look back to Windows ever again. I love my MacBook Pro to death, and I especially love Mac OS.
I have some money to spend, and there is a nice looking iMac G4 on a surplus website that I am extremely interested in purchasing if the price is right. Right now, it looks as though the price will stay pretty reasonable given that there is only 1 day and 21 hours left until the auction ends, and current bid is less than $65 dollars.
Here's the iMac that I'm interested in buying: From the pictures it looks to be a nice Mac.
I'd love to know anything and everything that I should know about this iMac whether the information is good or bad. What can you tell me about it?
From the pictures, it looks like it is running Leopard, so that seems nice (even though I'm used to Snow Leopard on the MBP).
There are a few things I'm hesitant about. Because it is a non-Intel Mac, I'm basically out of luck if I want to watch YouTube videos, play games that require Flash, etc. Right? YouTube does have a HTML5 beta version of the website, so would that work on a non-Intel Mac? I mainly browse forums, Yahoo! chat, etc. I should be fine, I think. I wouldn't kill me to watch YouTube videos or anything that required Flash on the MacBook Pro.
Would I be able to browse the internet using AirPort on this iMac?
Is there anything else that you think I should know before potentially buying this Mac?
Thank you SO much! I appreciate it! :)
Pictures:
http://i302.photobucket.com/albums/nn107/astroworldfan1/Screenshot2011-05-04at125855AM.jpg
http://i302.photobucket.com/albums/nn107/astroworldfan1/Screenshot2011-05-04at125444AM-2.jpg
http://i302.photobucket.com/albums/nn107/astroworldfan1/Screenshot2011-05-04at125605AM-1.jpg
http://i302.photobucket.com/albums/nn107/astroworldfan1/Screenshot2011-05-04at125619AM.jpg
http://i302.photobucket.com/albums/nn107/astroworldfan1/Screenshot2011-05-04at125636AM.jpg
I'm a new Mac user after having dealt with PC's for way too long, and I'm certain that I'll never look back to Windows ever again. I love my MacBook Pro to death, and I especially love Mac OS.
I have some money to spend, and there is a nice looking iMac G4 on a surplus website that I am extremely interested in purchasing if the price is right. Right now, it looks as though the price will stay pretty reasonable given that there is only 1 day and 21 hours left until the auction ends, and current bid is less than $65 dollars.
Here's the iMac that I'm interested in buying: From the pictures it looks to be a nice Mac.
I'd love to know anything and everything that I should know about this iMac whether the information is good or bad. What can you tell me about it?
From the pictures, it looks like it is running Leopard, so that seems nice (even though I'm used to Snow Leopard on the MBP).
There are a few things I'm hesitant about. Because it is a non-Intel Mac, I'm basically out of luck if I want to watch YouTube videos, play games that require Flash, etc. Right? YouTube does have a HTML5 beta version of the website, so would that work on a non-Intel Mac? I mainly browse forums, Yahoo! chat, etc. I should be fine, I think. I wouldn't kill me to watch YouTube videos or anything that required Flash on the MacBook Pro.
Would I be able to browse the internet using AirPort on this iMac?
Is there anything else that you think I should know before potentially buying this Mac?
Thank you SO much! I appreciate it! :)
Pictures:
http://i302.photobucket.com/albums/nn107/astroworldfan1/Screenshot2011-05-04at125855AM.jpg
http://i302.photobucket.com/albums/nn107/astroworldfan1/Screenshot2011-05-04at125444AM-2.jpg
http://i302.photobucket.com/albums/nn107/astroworldfan1/Screenshot2011-05-04at125605AM-1.jpg
http://i302.photobucket.com/albums/nn107/astroworldfan1/Screenshot2011-05-04at125619AM.jpg
http://i302.photobucket.com/albums/nn107/astroworldfan1/Screenshot2011-05-04at125636AM.jpg
OrangeSVTguy
Apr 19, 07:57 AM
Wont the OS 'be PPC', preventing it from booting on intel hardware, and also devoid of drivers? I know the apps included on OS X are UBs, but isn't the 'core' either PPC or x86?
Intel can boot from a GUID(intel) or Apple Partition Map-APM(PPC). Leopard is also universal as it contains all files for both PPC and x86 Macs. All Snow Leopard was basically a stripped down version of Leopard, just removed all PPC support.
I removed a hard drive from my G5 and had it in a USB enclosure and it booted just fine on my 2009 Mac Mini. I was running 10.5.8 even though my Mini shipped with 10.6.
Intel can boot from a GUID(intel) or Apple Partition Map-APM(PPC). Leopard is also universal as it contains all files for both PPC and x86 Macs. All Snow Leopard was basically a stripped down version of Leopard, just removed all PPC support.
I removed a hard drive from my G5 and had it in a USB enclosure and it booted just fine on my 2009 Mac Mini. I was running 10.5.8 even though my Mini shipped with 10.6.
SmoothJ
Apr 4, 03:45 PM
Thanks for the advice all. I am still thinking about it, but since the newer model is going to come out next year I may go with the newer one.
On the other hand, a good rule of thumb is never to buy a first generation of anything. In this case, a new design...so we will see.
On the other hand, a good rule of thumb is never to buy a first generation of anything. In this case, a new design...so we will see.
pazreal
Mar 18, 10:39 PM
Did you already have an iPhone that you then used the packaging from for this refurb?
